Bosch error codes
What the codes on your Bosch vaatwasser mean (Serie 2, Serie 4, Serie 6, Serie 8), what you can safely do yourself and when you need an engineer.
Where do you see the code?
A code like E:24 is on the display. On models without a display the lights flash in a pattern.
Reset
Turn the dishwasher off, wait 30 seconds and turn it on again. Otherwise hold the start button for 3 seconds to stop the programme.
Siemens and Neff use the same codes.
All codes
- E:15Water in the base (Aquastop)There's water in the base of the dishwasher and the leak protection has shut off the supply. Often due to foam or a small leak.Often fixable yourself
- E:24Water isn't drainingThe dishwasher can't get rid of the water. Usually the filter, the drain hose or the trap is blocked.Often fixable yourself
- E:25Drain pump blockedSomething is blocking the drain pump, often a piece of glass, a pip or a label.Often fixable yourself
Questions about Bosch
How do I reset my Bosch vaatwasser?
Turn the dishwasher off, wait 30 seconds and turn it on again. Otherwise hold the start button for 3 seconds to stop the programme.
Where is the fault code shown on my Bosch?
A code like E:24 is on the display. On models without a display the lights flash in a pattern.
Which Bosch faults can I fix myself?
E:15 (water in the base (aquastop)), E:24 (water isn't draining), E:25 (drain pump blocked): the page for each code lists the steps you can safely do yourself.
Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.