Skip to content

Now live in Tilburg and surroundingsSomewhere else?Only pay when it's doneNo lead feesNederlands: Bekijk deze pagina in het Nederlands

NL: Bekijk deze pagina in het Nederlands

Simply sorted.

Daikin warmtepomp

Fault U4: no connection between indoor and outdoor unit

Engineer needed

The indoor unit can't reach the outdoor unit. Sometimes after a power cut, sometimes due to a cable or circuit board fault.

Do this first

  1. Check whether the outdoor unit's circuit is on.
  2. Disconnect the heat pump from the power completely for a few minutes and turn it on again.

When should you call an engineer?

If U4 comes back, have an installer check the connection and the circuit boards.

Reset

Turn the heat pump off and on again via the controls. For an outdoor unit fault it sometimes helps to switch off its circuit for a few minutes.

Still under warranty?

Add your warmtepomp to your home file, with the installation date. Then you'll see whether it's still under warranty and get a reminder for servicing.

Add appliance

Frequently asked questions

What does U4 mean on a Daikin warmtepomp?

The indoor unit can't reach the outdoor unit. Sometimes after a power cut, sometimes due to a cable or circuit board fault.

Can I fix U4 myself?

Check whether the outdoor unit's circuit is on. Disconnect the heat pump from the power completely for a few minutes and turn it on again. If U4 comes back, have an installer check the connection and the circuit boards.

Other Daikin codes

Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.