Central heating boiler not working: what now?
No heating or hot water? Often it's low pressure or a fault you can clear with the reset button.
Do this now
- Look at the display for the fault code and look it up in the manual.
- Look at the pressure gauge: below 1 bar the boiler needs topping up.
- Press the reset button once. If it goes into fault again, don't keep pressing.
Is there a code on the display? Look up the error code for your brand.
Possible causes
- Water pressure too low
- The most common cause. Topping up to 1.5 to 2 bar often solves it.
- Frozen condensate pipe
- In hard frost the drain outside can freeze.
- Ignition or pump
- A broken ignition, sensor or pump has to be replaced by an engineer.
- Thermostat
- Flat batteries or a loose connection to the thermostat.
What can you do yourself?
- Top up the boiler with the filling hose to 1.5 to 2 bar.
- Replace the thermostat batteries.
- Thaw a frozen condensate pipe with warm (not boiling) water.
When should you call a pro?
Call an engineer if the fault comes back after one reset, if the pressure keeps dropping, or if you smell gas.
What does the repair cost?
€90 to €350
A call-out for a fault costs € 90 to € 150; with a new part € 150 to € 350.
Amounts incl. VAT. Through Vakmensen you only pay when the job is done. Does something need replacing? Read what cv-ketel vervangen costs.
Frequently asked questions
Cv-ketel doet het niet: wat moet ik doen?
Look at the display for the fault code and look it up in the manual. Look at the pressure gauge: below 1 bar the boiler needs topping up. Press the reset button once. If it goes into fault again, don't keep pressing.
What does it cost to have this fixed?
A call-out for a fault costs € 90 to € 150; with a new part € 150 to € 350.
How often can I press the reset button?
Once or twice. If the fault comes back, something is broken and resetting more often can damage the boiler.