Vaillant cv-ketel
Fault F.29: flame goes out while burning
The flame goes out while the boiler is working. Causes are an interrupted gas supply, a blocked condensate drain or flue, or a dirty burner.
Do this first
- Check that the gas tap is fully open.
- In frost: check that the condensate drain outside isn't frozen.
- Press reset once.
When should you call an engineer?
If the flame keeps going out, have an engineer check the gas pressure, the burner and the flue.
Reset
Press the reset button once (on most ecoTEC models the button with the arrows or 'reset'). If the boiler goes into fault again, don't keep resetting but call an engineer.
Still under warranty?
Add your cv-ketel to your home file, with the installation date. Then you'll see whether it's still under warranty and get a reminder for servicing.
Add applianceWant to know more? Read central heating boiler not working: what now?
Frequently asked questions
What does F.29 mean on a Vaillant cv-ketel?
The flame goes out while the boiler is working. Causes are an interrupted gas supply, a blocked condensate drain or flue, or a dirty burner.
Can I fix F.29 myself?
Check that the gas tap is fully open. In frost: check that the condensate drain outside isn't frozen. Press reset once. If the flame keeps going out, have an engineer check the gas pressure, the burner and the flue.
Other Vaillant codes
- F.22 too little water in the boiler
- F.28 ignition failed
- F.75 no pressure difference when the pump starts
- F.20 overheating
- F.00 flow sensor interrupted
- F.01 return sensor interrupted
- F.10 flow sensor short circuit
- F.27 flame detected while the gas valve is closed
- F.61 fault in the gas valve control
- F.62 gas valve closes too slowly
- F.63 memory error (eeprom)
- F.64 fault in electronics or sensor
- F.73 pressure sensor signal too low
- F.83 dry firing at burner start
Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.